Post-Requisites - Alienware ALPHA Service Manual

7 Turn on your computer.
A message is displayed to confirm that the CMOS settings are reset and
default BIOS setup has been loaded.
8
Press F1 to continue and wait till the operating system is completely
loaded.
9 Shut down your computer.
10 Remove the
11 Remove the
12 Remove the
13 Remove the
14 Remove the jumper plug from the CMOS jumper and replace it on the
password jumper.

Post-requisites

1
Replace the video-card
2 Replace the processor
3
Replace the top
4 Replace the base
86
base cover.
top cover.
processor fan.
video-card fan.
fan.
fan.
cover.
cover.