EverFocus ECOR FHD 4F User Manual page 78

2. The position of each device on the OSD layout represents the physical positions of your
monitors which you should arrange and place in the setup environment.
3. Click an IP address field to enter the IP address of a Sub Server and the first Sub Server
must be adjacent to Main Server on the OSD layout (DVR 2 or DVR 5), or it won't work.
4. Set up the rest of the Sub Servers by entering their IP addresses, and please note that the
Sub Servers must be adjacent to one another on the layout, or it won't work.
5. Click Save to save the setting.
ECOR FHD 4F / 8F / 16F Full HD DVR
Main Server Sub Server
Monitor Monitor
70