EverFocus ECOR FHD 4F User Manual page 16

No. Name
1 Video Input
2 Call Monitor Port (BNC)
3 Audio Input 1~4 (RCA)
4 Alarm Input / Output
5 Power Switch
6 Main Monitor Port (HDMI)
7 Audio Output RCA
8 Main Monitor Port (VGA)
9 LAN
10 USB Interface
11 RS-485 Port
12 Power Port
Description
Connect up to 4 / 8 / 16 analog HD or SD cameras to any
channels using the coaxial cables. (The eZ.HD series DVR
doesn't support HD-TVI / HD-CVI / HD-SDI cameras.)
Note: The DVR can automatically configure itself as NTSC or
PAL. To do this, connect a camera to any channel of the DVR.
The DVR will detect the first connected camera format (NTSC
or PAL) and then automatically configure itself to the
detected format from the first connected camera. For
example, if the format of the first connected camera is NTSC,
the DVR will configure itself to NTSC format.
Connects to the Call monitor using a BNC cable.
Connects to the audio input devices such as microphones.
Note that the microphone with a (built-in) amplifier and
external power supply is required.
Connects to 4 alarm inputs, and to 1 alarm output device.
You can also connect to the radio-controlled clock for time
synchronization. Please refer to 2.2.2 Alarm I/O.
Press to turn on or off the power.
Connects to the Main monitor using a HDMI cable.
Connects to the audio output devices, such as speakers.
Note that the speaker with a (built-in) amplifier and external
power is required.
Connects to the Main monitor using a VGA cable.
Connects to the Network.
The USB2.0 port for connecting to a mouse, external storage
device or EKB200 keyboard.
Connects to the RS-485 device, such as EverFocus' EKB-500
keyboard.
Connects to the DC 12V power using the supplied Power
Cord.
8
ECOR FHD 4F / 8F / 16F Full HD DVR