Before printing with the SubliJet-R inks perform a nozzle check using the printer driver to ensure you have all
colours printing.
1. Navigate to the 'Printers' configuration window in your operating system. Right click on 'GelSprinter
GX e7700N' and choose 'Printing Preferences'.
2. Click the 'Maintenance' tab.
3. Select 'Nozzle Check' and follow the prompts.
Figure 13
4. The pattern should look like the one shown below (Figure 13).
Figure 14
5. If you have breaks in the nozzle check pattern (Figure 23 run the cleaning process (no more than
three times) followed by a nozzle check pattern after each.
Figure 15
Important: Do not over-clean the Ricoh as this just wastes ink and in most cases, the nozzle check pattern
will deteriorate rather than improve.
*
Prices shown in $AUD and exclusive of GST and freight. Products are subject to availability. Prices and specifications are subject to change without notice.