9. When you have your image ready on screen, select File > Print. You will see a similar print dialogue
box as shown below.
10. Select the 'GelSprinter GX e7700N' from the drop down menu and then click 'Properties' (Figure 26).
Figure 26
11. The Ricoh properties will now show (Figure 27). Ensure the 'GJS GX7700' setting is highlighted as
configured on page 14. If it is not click on 'GJS GX7700' from the drop down list and click 'OK'.
Figure 27
12. Click the 'Prepress' tab. Tick 'Mirror'.
Figure 28
*
Prices shown in $AUD and exclusive of GST and freight. Products are subject to availability. Prices and specifications are subject to change without notice.