Ricoh siubli-trans XPRES GXe7700N Instruction Manual page 15

gjs
MACHINERY
4. Configure Import/Export Settings. Click on the image of the paper documents
following window:
Figure 24
a. Under 'Import', select 'Always convert using' and 'Internal RGB – Fraser (1998)' from the drop
down menu.
b. Under 'Export', select 'Always embed using' and 'Internal RGB – Fraser (1998)' from the drop
down menu.
5. Configure Advanced Settings. Click on the image in the centre of the screen of the three RGB
circles.
Figure 25
a. Under 'Rendering Intent', select 'Perceptual'. Click 'OK'.
6. Composite Printer. Select the 'Ricoh' colour profile previously installed.
Note: if you can't choose the subli-trans RGB profile from the drop down menu it means the ICC
profile is not yet installed on your pc or you may not have restarted Corel since the ICC installation.
Refer back to page 7, close and re-launch Corel.
7. Internal RGB Space. Select 'Internal RGB – Fraser (1998)'.
8. Monitor. Select the ICC profile for your monitor (If you also have Adobe Photoshop on your system
you can select the profile you created in Adobe Gamma). You may also check out the website of
your monitor manufacture for ICC profiles for your particular monitor. Download it and install into the
folder listed under ICC Profile Installation / Exceptions on page 7.
9. Scanner. Again select your scanner ICC profile. If your scanner is not listed, check out the website of
scanner manufacture for ICC profiles for your particular scanner. Download it and install into the
folder listed under ICC Profile Installation / Exceptions on page 7.
10. Separations Printer. Not used or set to your current device if you print separations
11. Save your settings. Click the
*
Prices shown in $AUD and exclusive of GST and freight. Products are subject to availability. Prices and specifications are subject to change without notice.
button and name your settings 'GJS GX7700'. Click 'OK'.
15
subli-trans XPRES™ GXe7700N Instruction Manual
to open the
Last Updated: 18/06/2012