Network Settings - Parrot BEBOP 2 User Manual

Network settings

Product name
Select country
Wi-Fi type
Change the network name of your Bebop 2:
1. Change the Bebop 2 name in the
2. Reboot the Bebop 2.
Note:
The network name of the Bebop 2 can only contain
letters, numbers and underscores ("_"). It must not exceed 32
characters in length.
Select your country.
Connect the Bebop 2 to the 2.4 or 5 G
The 2.4 G Wi-Fi band enables you to fly the Bebop 2 from
· Hz
a greater distance. It is generally more congested than the 5
G Wi-Fi band in urban areas.
Hz
The 5 G Wi-Fi band enables you to obtain a better
· Hz
connection between the Bebop 2 and your smartphone for
streaming footage. Check your smartphone user guide (or
the technical specifications) to see whether it supports
connection to the 5 G
2.4 G Wi-Fi band only.
Hz
To switch the Wi-Fi band (2.4 G
using the application, hold down the on/off button of the
Bebop 2 for 5 seconds .
Note :
The diagram at the bottom of the screen shows the
state of the Wi-Fi channels. Red curves represent congested
channels. Green curves represent less congested channels. The
channel without curves are free.
Product name
Wi-Fi bands.
Hz
Wi-Fi band. If it does not, use the
Hz
or 5 Gh ) manually without
Hz z
field.
uality
q
27
Settings