Network Settings - Parrot bebop 2 User Manual

Network settings

Product name
Select country
Wi-Fi type
26 Settings
Change the network name of your Bebop 2:
1. Change the Bebop 2 name in the
2. Reboot the Bebop 2.
Note: The network name of the Bebop 2 can only contain
letters, numerals and underscores ("_"). It must not exceed 32
characters in length.
Select your country.
connect the Bebop 2 to the 2.4GHz or 5GHz Wi-Fi bands.
·
The 2.4 GHz Wi-Fi band enables you to fly the Bebop 2 from
a greater distance. It is generally more congested than the 5
GHz Wi-Fi band in urban areas.
·
The 5 GHz Wi-Fi band enables you to obtain a better
connection between the Bebop 2 and your smartphone.
Check your smartphone user guide (or the technical
specifications) to see whether it supports connection to the
5 GHz Wi-Fi band. If it does not, use the 2.4 GHz Wi-Fi band
only.
To switch the Wi-Fi band (2.4 GHz or 5 Ghz) manually without
using the application, hold down the on/off button of the
Bebop 2 for 5 seconds .
Note : the diagram at the bottom of the screen shows the
state of the Wi-Fi channels. Red curves represent congested
channels. Green curves represent less congested channels. The
channel without curves are f ree.
Product name field.