Network Settings - Parrot BEBOP 2 User Manual

Network settings

Network Name
WPA2
Location
Wi-Fi band
Change the network name of your Parrot Bebop 2:
1. Change the Parrot Bebop 2 name in the
field.
2. Reboot the Parrot Bebop 2.
Note:
The network name of the Parrot Bebop 2
contain letters, numbers and underscores ("_"). It must not
exceed 32 characters in length.
Set a password for your Parrot Bebop 2's Wi-Fi network.
Select your country.
Connect the Parrot Bebop 2 to the 2.4 or 5 G
Hz
The 2.4 G Wi-Fi band enables you to fly the Parrot
·
Bebop 2 from a greater distance. It is generally more
congested than the 5 G
Hz
The 5 G Wi-Fi band enables you to obtain a better
·
q
uality connection between the Parrot Bebop 2 and your
smartphone for streaming footage. Check your smartphone
user guide (or the technical specifications) to see whether it
supports connection to the 5 G
Hz
use the 2.4 G Wi-Fi band only.
To switch the Wi-Fi band (2.4 G
without using the application, hold down the on/off button of
the Parrot Bebop 2 for 5 seconds .
Note :
The diagram at the bottom of the screen shows the
state of the Wi-Fi channels. Red curves represent congested
channels. Green curves represent less congested channels.
The channel without curves are free.
Product name
Hz
Hz
Wi-Fi band in urban areas.
Hz
Wi-Fi band. If it does not,
Hz
or 5 Gh
can only
Wi-Fi bands.
z
) manually
Settings 27