Flight settings
Calibrate
Flat Trim
Max vertical speed
Max rotation speed
Recording settings
The Bebop 2 is e
Note:
The camera lens is situated at the front of the
24
Settings
Calibrate the Bebop 2. Use this feature when the Bebop 2 is
unstable in flight.
The flat trim feature is used to reset the sensors to there
hori
ontal position. Launch the flat trim feature after a crash
z
or if the Bebop 2 appears to drift in flight.
information, see the Flat Trim section.
Define a maximum speed when you fly the Bebop 2 upwards.
Define a maximum speed when you make the Bebop 2 rotate.
When you fly the Bebop 2 hori
the angle of inclination.
uipped with a fisheye (wide-angle) camera.
q
ontally, its speed depends on
z
Bebop 2
.
For more