Maintenance - MK Diamond Products MK-2005H Owner's Manual Operating Instruction & Parts List

MK-2000 GAS SAW

MAINTENANCE

INITIAL MAINTENANCE
Perform the following after initial purchase and operation of the MK-2000 Gas Saw.
(B)
(A)
Check and adjust V-belt tension
Change engine oil after first
following first 48 hours of opera-
month or first 20 operating hours.
tion. See Micro V-belt Inspection.
Refer to Engine Manual.
MAINTENANCE FOLLOWING USE
To extend the life of the MK-2000 Gas Saw, the following procedure should be performed after each
use. Lubricate all points listed below with light oil such as, 3 in 1, WD-40, etc.
(A) (B) (C)
Place Engine Switch in the Lubricate the Movable Cutting Lubricate Torsion Spring.
OFF position. table Roller Wheels.
(D) (E)
Lubricate Blade Guard Pivot. Lubricate engine throttle link-
age Points and Adjustment Bar.
Refer to Engine Manual.
29