MK-2000 GAS SAW
FILLING OIL RESERVOIR
NOTE:
Refer to the Engine Manual for your specific engine.
(A)
Level Cutting Head and motor.
NOTE:
When installing the Oil Dipstick, ensure the threads are aligned with the threads of the Oil
Reservoir so as not to "cross-thread" the dipstick.
Bottom Edge
(D)
Add Oil until level reaches the
bottom edge of fill hole.
(B)
Remove Dipstick.
(E)
Install Dipstick.
18
DIAMOND BLADE
(C)
Fill Oil Reservoir.
(F)
Clean up.