Maintenance - MK Diamond Products MK-2013HE GX390 Owner's Manual

MK-20 SERIES
MAINTENANCE SCHEDULE
Item should be performed at every indicated hour(s) or interval period whichever goes first.
Maintenance Schedule
Air Filter
Hydrostatic
Transmission/Reservoir
Mainframe
Battery
Engine

Maintenance

Operation
Check
Change Air Filter
Check Oil
Blade Shaft
Bearings
Pivot Bearings
Chain Drive
Transmission
Control Assemblies
Battery
V-Belts
Check Water Level
Definitive information on engine maintenance is contained in the Engine Manual
provided separately. Perform all maintenance procedures as recommended by the
engine manual.
28
Daily 25 Hours
or Weekly
Every 4 Hours
When Dry Cutting
Every 8 Hours
When Wet Cutting
•
Lube Blade Shaft
Bearings at end of
Operations
•
MAINTENANCE
100 Hours or
Seasonal
•
•
Adjust Tension
•
•
•
Replace
•
•
•