more information about these modes, see the
Flight settings
Calibrate
Flat Trim
Max vertical speed
Max rotation speed
Recording settings
The Bebop 2 is equipped with a fisheye (wide-angle) camera.
Note:
The camera lens is situated at the f ront of the Bebop 2. The lens situated under the
Bebop 2 is f or stabilization only.
Movement
Calibrate the Bebop 2. Use this feature when the Bebop 2
does not stay on course correctly.
Use the flat trim feature to have a flat take-off surface.
Launch the flat trim feature after you change the battery or if
the Bebop 2 does not stay on course correctly. For more
information, see the Flat Trim section.
Define a maximum speed when you fly the Bebop 2 upwards.
Define a maximum speed when you make the Bebop 2 rotate.
When you fly the Bebop 2 horizontally, its speed depends on
the angle of inclination.
section.
Settings
23