Direct Audio Input (Dai); Setting The Volume - ReSound Match MA3T90-VI User Manual

Direct Audio Input (DAI) capability
This hearing instrument is equip-
ped with direct audio input (DAI)
capability. DAI allows an external
sound source to be connected di-
rectly to the hearing aid via a DAI
boot. You will receive an improved
signal, when using DAI, because the
sound is fed directly into the he-
aring aid, bypassing some of the normal sources of noise.
Some of the external devices that can be connected to the DAI
boot are a telephone, a CD player, a computer etc...
The DAI boot is an optional accessory that can be purchased
through your hearing care professional.
• The sound source connects to your hearing instrument with
a cable and an audio boot.
• To use direct audio input (DAI), set the hearing instrument to
the DAI program (available in program 4).
• In this program, you will typically not hear any sound from
the microphone. Therefore, most environmental sounds will
not be heard in the ear that is set to DAI.
10
The hearing instrument can be turned on and off when the DAI
boot is connected:
• Turn off by pushing the plug
downwards
• Turn on by pushing the battery
door shut

Setting the volume

Volume is adjusted by means of a conveniently located rotary
control marked from »1« (minimum level) to »4« (maximum
level).
Your instrument has a volume
control which allows you to set
and control the volume manually.
At the hearing instrument fitting,
your hearing care practitioner will
choose an optimal volume setting
for you. Please note the setting of
that particular level.
Your volume control has numbers on it to indicate how loud the
hearing instrument is set.
11