1. Manuals
  2. Brands
  3. Caraudio-Systems Manuals
  4. Recording Equipment
  5. c.LOGiC lite C1-MFD3
  6. Manual

Caraudio-Systems c.LOGiC lite C1-MFD3 Manual

For navigation systems volkswagen mfd3/rns510, rns810 skoda columbus seat trinax
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
c.LOGiC lite-Interface
C1-MFD3
For navigation systems
Volkswagen MFD3/RNS510, RNS810
Skoda Columbus
Seat Trinax
Only for vehicles WITHOUT factory rear-view camera
Product features
• full plug and play multimedia interface
• 1 AV-inputs with separate IR-control channel
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, ...
• after-market rear-view camera input
• automatic switching to rear-view camera input (optional coding necessary for automatic
switching from OEM-Modes)
• rear-view camera power (+12V max. 1A)
• power on remote out trigger signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 24.01.2012
C1-MFD3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the c.LOGiC lite C1-MFD3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Caraudio-Systems c.LOGiC lite C1-MFD3

Summary of Contents for Caraudio-Systems c.LOGiC lite C1-MFD3

  • Page 1 c.LOGiC lite-Interface C1-MFD3 For navigation systems Volkswagen MFD3/RNS510, RNS810 Skoda Columbus Seat Trinax Only for vehicles WITHOUT factory rear-view camera Product features • full plug and play multimedia interface • 1 AV-inputs with separate IR-control channel • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, … •...

  • Page 2: Table Of Contents

    Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-403 2. Connection schema 3. Installation 3.1. Interconnecting Interface-box, CAN-box and harness 3.2. Connections to head-unit 3.3. Connecting peripheral devices 3.3.1.

  • Page 3: Prior To Installation

    Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.

  • Page 4: Check Compatibility Of Vehicle And Accessories

    1.2. Check compatibility of vehicle and accessories Requirements Vehicle Volkswagen, Seat and Skoda Navigation MFD3/RNS510, RNS810, Trinax or Columbus navigation Limitations Factory-TV-tuner Must NOT be installed. After-market rear-view Only compatible with NTSC-cameras. camera Automatic switching to camera from OEM mode only works after coding the head-unit to rear-view camera per diagnosis or our optional available OBD-coder OBD-MFD3-R- computer...

  • Page 5: Connection Schema

    2. Connection schema Version 24.01.2012 C1-MFD3...

  • Page 6: Installation

    3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.

  • Page 7: Connections To Head-Unit

    3.2. Connections to head-unit Remove the head-unit from the dash-board. Transfer female Quadlock connector from the back of the head-unit to male Quadlock connector of harness TV-VW02. Plug female Quadlock connector of TV-VW02 into male Quadlock socket of head-unit. Plug female 26pin AMP-connector of C1C-VW03 into male 26pin AMP-socket of head-unit.

  • Page 8: Av-Source

    3.3.1. AV-source The c.LOGiC interface has the possibility to connect and remotely control by navigation buttons one pre-programmed device. The device list in the device control table (Appendix A) shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device.

  • Page 9: After-Market Rear-View Camera

    3.3.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to female RCA connector R-CAM IN of Interface-box C1C-M03. Connect the green wire of the 4pin cable to the camera power supply (+12V max. 1A) of the after-market rear-view camera and the grey wire to ground of the vehicle. The green wire is high (+12V max.

  • Page 10: Operation

    4. Operation 4.1. Activation of the video-in-motion function The video-in-motion function is activated permanently without disturbing the navigation performance. 4.2. Selecting the c.LOGiC as current AV-source Push the MEDIA button of the head-unit and then select VIDEO to choose the c.LOGiC as current AV-source.

  • Page 11: Other Remote Functions

    4.4.2. Other remote functions When AV1 or AV2 mode is activated, enter Senderliste (channel list). The menu which opens offers a range of commands for the active device. The function description equals the remote control buttons of the additional device. On the additional device the writing may vary (e.g.

  • Page 12: Specifications

    Power consumption Temperature range -30°C to +80°C Weight Measurements (box only) B x H x T 106 x 30 x 71 mm 6. Technical Support Caraudio-Systems Vertriebs GmbH NavLinkz GmbH manufacturer/distribution corporate sales/tech dealer-support Rheinhorststr. 22 Eurotec-Ring 45 D-67071 Ludwigshafen am Rhein...

Table of Contents