1. Manuals
  2. Brands
  3. Caraudio-Systems Manuals
  4. Recording Equipment
  5. usbLOGiC USB-RNSE
  6. Manual

Caraudio-Systems usbLOGiC USB-RNSE Manual

For navigation systems audi navi plus rns-e
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
usbLOGiC USB-AV-Player
USB-RNSE
For navigation systems
Audi Navi Plus RNS-E
Only for vehicles WITHOUT factory rear-view camera
Product features
• USB-port for media up to 2 TB (2000GB)
• supports FAT32 and NTFS formatted media
• multi partition capable
• compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more
• last position memory
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel
• control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, ...
• after-market rear-view camera input
• automatic switching to rear-view camera input (optional coding necessary to switch from
OEM-modes)
• rear-view camera power (+12V max 1A)
• rear-seat-entertainment AV-output
• optional remote control for full USB functions/rear-seat-entertainment
• power on remote out trigger signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 24.02.2012
USB-RNSE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the usbLOGiC USB-RNSE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Caraudio-Systems usbLOGiC USB-RNSE

Summary of Contents for Caraudio-Systems usbLOGiC USB-RNSE

  • Page 1 usbLOGiC USB-AV-Player USB-RNSE For navigation systems Audi Navi Plus RNS-E Only for vehicles WITHOUT factory rear-view camera Product features • USB-port for media up to 2 TB (2000GB) • supports FAT32 and NTFS formatted media • multi partition capable • compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more •...

  • Page 2: Table Of Contents

    Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-400 1.4. Setting the dip switches of the USB-box USBC-M500 1.4.1. Automatic switching to rear-view camera 1.4.2. Deactivating usbLOGiC AV-input 2.

  • Page 3: Prior To Installation

    Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.

  • Page 4: Check Compatibility Of Vehicle And Accessories

    1.2. Check compatibility of vehicle and accessories Requirements Vehicle Audi, Lamborghini Navigation Audi Navi Plus RNS-E all-in-one navigation 16:9 Limitations Factory-TV-tuner Must NOT be installed. After-market rear-view Only compatible with NTSC-cameras. camera Automatic switching to camera from OEM mode only works after coding the head-unit to rear-view camera per diagnosis computer (Only possible on RNS-E with minimum software 550 and till year 2010).

  • Page 5: Automatic Switching To Rear-View Camera

    1.4.1. Automatic switching to rear-view camera If an after-market rear-view camera shall be connected, in order for the usbLOGiC to automatically switch to its camera input dip switches on engaged reverse gear, of USB-box set dip2 = ON (up). Note: With after-market cameras, automatic switching works only from usbLOGiC mode. For automatic switching from OEM modes, it is necessary to code the head-unit to rear-view camera per diagnosis computer.

  • Page 6: Connection Schema

    2. Connection schema Version 24.02.2012 USB-RNSE...

  • Page 7: Installation

    3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.

  • Page 8: Connections To Head-Unit

    3.2. Connections to head-unit Remove the head-unit from the dash-board. Transfer female Quadlock connector from the back of the head-unit to male Quadlock connector of harness C3C-RNSE. Plug female Quadlock connector of C3C-RNSE into male Quadlock socket of head-unit. Plug female 32pin AMP-connector of C3C-RNSE into male 32pin AMP-socket of head- unit.

  • Page 9: Usb And Optional Ir-Remote Control Set

    3.3. USB and optional IR-remote control set Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USB- box USBC-M500 and install the USBC-EXT socket in a well accessible location, e.g. the glove-box. Make sure there is enough space to load USB-media. Installation socket for the connection of USB-media.

  • Page 10: Av-Source

    3.4.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table (appendix A) shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device.

  • Page 11: After-Market Rear-View Camera

    3.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to female RCA connector R-CAM IN of USB-box USBC-M500. Connect the green wire of C3C-RNSE to the camera power supply (+12V max. 1A) The green wire is high (+12V) when reverse gear is engaged. Connect the loose white-brown wire of the female Quadlock connector of harness C3C-RNSE to the green wire of harness C3C-RNSE, too.

  • Page 12: After-Market Rear-Seat-Entertainment

    3.4.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of USB-box USBC-M500. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors.

  • Page 13: Assigning Device Control For Connected Av-Source

    4.4. Assigning device control for connected AV-source After selecting the usbLOGiC as current AV source, switch to the usbLOGiC’s AV-input. Now longpress key SETUP. The FIS will display “TV 2” and “RC01”. Turn right knob until the device-related IR-code as described in device control table (appendix A) is reached. Push right knob to confirm the assignment.

  • Page 14: Picture Settings

    Button assignment table usbLOGiC Audi Navi Plus RNS-E Head- Internal DVB-T DVD-player DVD- iPod®-control Analog-tuner unit tuners changer button TRACK - CH - TRACK - TRACK - TRACK - CH - 1 long POWER SHUFFLE TRACK + CH + TRACK + TRACK + TRACK + CH +...

  • Page 15: Specifications

    -30°C to +80°C Weight 312g Measurements (box only) B x H x T 135 x 30 x 105 mm 6. Connections (USB-box) 7. Technical Support Caraudio-Systems Vertriebs GmbH NavLinkz GmbH manufacturer/distribution corporate sales/tech dealer-support Rheinhorststr. 22 Eurotec-Ring 45 D-67071 Ludwigshafen am Rhein...

Table of Contents