Furuno FI-504 MULTI Operator's Manual page 15

Environment category
Display title
Battery voltage
Minimum battery voltage
alarm
Time
Date
Water temperature
Air temperature
Air pressure
Humidity
Wind chill temperature
Dew point
Autopilot category
Display title
Rudder angle
Engine category
Display title
Trip fuel used
Fuel rate
Engine RPM
Note: In case of multiple engines, the data of desired engine number
(max. eight, E0-E7) can be selected with the SELECT/CLEAR key.
Scrolling speed and scrolling direction
Display scrolling speed and direction can be changed by the length of
key push.
Short push: Scroll in forward order.
Medium push: Go back one display. Several beeps sound and then the
previous display appears.
Hold down: Rapid scrolling, in forward direction. Several beeps sound
and then speed is changed.
Indication
VOLTS
VOLTS LO
-
-
WATER
AIR
PRE
HUMID
CHILL
DEW
Indication
RUDDER
Indication
TOTAL
RTE (L/H)
RPM
1. OPERATION
Function
Battery voltage.
Set low battery voltage alarm.
Audio and visual alarms are
released when the battery
voltage goes lower than the
threshold value.
Current time, in 12-hour or
24-hour format.
Current date.
Water temperature, in ° C or ° F.
Air temperature, in ° C or ° F.
Air pressure, in Hectopascal.
Relative humidity, in percentage.
Wind chill temperature, in ° C or
° F.
Dew point, in ° C or ° F.
Function
Rudder angle, in degrees either
P(ort) or S(tarboard).
Function
Total fuel consumption, in liters
or gallons.
Amount of fuel consumed in
hour, in liters/hour (L/H) or
gallons/hour (G/H).
Engine speed per minute.
7