Verifying The Signal Strength Between The Eim And The Thermostat; Replacing Wireless Devices; Thermostat - Honeywell TL9160AR Installation Manual

System Installation Guide

Verifying the signal strength between the EIM and the thermostat

If you have more than one EIM linked to the thermostat, the displayed value is between
the thermostat and the first-linked EIM. The signal strength ranges from 0 (no signal) to 10
(strongest).
# Display
1)
2)
3)
4)

Replacing wireless devices

Thermostat

To replace the thermostat, install batteries in the new thermostat (see page 7) and link it to
the wireless network (see page 8). To customize the thermostat, see pages 11-18.
If more than one EIM were linked to the old thermostat, you can link the new
thermostat from any one of these EIMs.
69-2474EFS—01
Button
22
Step
From the home screen, press
and hold the right center
button for 5 secs.
to select Link and
Press
press OK.
to select Strength
Press
and press OK.
The signal strength is
displayed. Press Exit twice
to return to installer's setup
menu or three times to return
to home screen.