Exit Wireless Setup; Customize The Thermostat; Accessing The Installer Setup Menu; Exiting The Menus - Honeywell TL9160AR Installation Manual

4 Exit wireless setup

1 Press the EIM Connect button. Its green flashing light will change to a steady green
light.
If you do not press the connect button, the EIM will automatically exit wireless setup
after 15 minutes of inactivity.
2 Put the cover back on the antenna module.

5 Customize the thermostat

Accessing the installer setup menu

• To access the installer setup menu from the home screen,
press and hold the right center button for 5 secs.
Navigating the menus
• Press or to navigate the menus and setup functions.
• Press OK to select the flashing menu or setup function.
Modifying the settings
• Press or to to modify the displayed setting.
• Press OK to save the displayed setting. The setting will
flash to confirm that it has been saved.

Exiting the menus

• Press Exit once to return to the previous menu or as
many times as necessary to return to the home screen.
If you press Exit after you have changed a setting, the
new setting will not be saved. Make sure you press OK
to save the new setting before you press Exit.
EConnect™ Wireless Thermostat Kit TL9160AR
11 69-2474EFS—01