Changing system setup
If the thermostat is reset to factory default
settings, you need to change the thermostat
settings to match your heating/cooling system.
Your contractor did this when the thermostat
was installed. Follow these steps to setup the
thermostat, or call your contractor to do it.
MENU.
1 Touch
The thermostat displays a list
of options.
System
2 Select
displays the first screen of options that you
can change.
3 On each screen, make changes as needed
Next
then touch
Repeat this step until you have made all
changes. Tables on pages 45-46
explain the System Setup screens and
options.
4 When you have made all changes, press
Done
to save and exit.
69-2814EFS—05
Setup. The thermostat
to display new options.
44
System Setup
Touch the Help button
to see information
about screen options.
MENU
Next