Burning Linux Image - Waveshare E9 User Manual

Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China

12.3.3 Burning Linux Image

 Copy image:
Copy the linux image: u-boot_E9_for_linux_v2.0.bin, uImage_E9_for_linux_v2.0, rootfs_E9_for_linux_v2.0.tgz
to the SD images\bootloader\ directory and images\linux directory separately, remove the "_E9_for_linux_v2.0"
in the image name, then after that the burning file in the SD card should be like this:
 Modify EmbedSky.ini file
Note 1: The file format can't change optionally, and there is no space behind "=", and it cannot add or delete
a line either.
Note 2: The following "//XXX" is for comments only, and please don't add these comments when using the
file, or else there will be mistakes.
Note 3: When users burning the ubuntu, it needs to pay attention to the comments, and modify it according to
actual situation. There is no need to change others.
Note 4: For those images which don't need to update, it can be set as null, such as "Kernel ="
#### This is E9 SD config files ####
operating condition=install
OS Type=linux
LED indicator=off
Beep=off
extern_indication=partition
#### Others ####
bootloader=images\bootloader\u-boot.bin
LOGO=
#### Others end ####
#### Linux ####
kernel=images/linux/uImage
Waveshare Electronics
TEL: +86-755-83040832
FAX: 86-755-83042572
// operating system instructions
// external indication, partition means it needs to partition, it is better to add this
//u-boot image storage directory
//linux uImage storage directory
Web: http://www.wvshare.com/
E-mail: sales@wvshare.com
90