Table of Contents
Advertisement
Waveshare Electronics
Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
TEL: +86-755-83040832
Web: http://www.wvshare.com/
FAX: 86-755-83042572
E-mail: sales@wvshare.com
Chapter Ten Android Testing
The following test is used the 1280*768 resolution output by FPC->VGA, if users use other resolution (such as
800*400 output by FPC), then there may be slightly different, but it does not affect the use at all.
Set the E9 boot mode as EMMC by jumper cap, then power up and long press the power button. The red power
light near the power will always be bright (if press it only but not long press, the power is not bright at all), then it
means that the board uboot is already run up. Users can enter uboot and make related settings to wait for the
system boot up automatically.
After the system has been booted, then you will see it as the following picture shows, slide to unlock and enter to
the system. As the testing is almost the same as the Android phone/tablet, here we will introduce briefly.
10.1 TF Card Testing
TF card supports hot plug, so you can insert TF card before or after the system boot, the following test is taken
when the TF card is inserted after the system is booted. After inserted, the system detects TF card, then it will
mount automatically. The following is the serial printing information when mounting:
Note:
The serial print information will be different due to the different TF card; here it is for reference only.
67
Advertisement
Table of Contents
