Table of Contents
Advertisement
Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
Step6. After setting, please choose "save setup as dfl" in configuring list to save the current settings as the default
settings. (It must do this step, otherwise it needs to reconfigure next time you start minicom). Choose Exit to get
out of the configuration page and enter minicom.
When you want to start the minicom next time, input minicon in the terminal and then press Enter, then you 后回
can enter it directly. The command minicom is for enter the serial port super terminal page, while minicom –s is
the command for config minicom. Minicom is based on the window page. If you want the function pop-up
window, then you can press ctrl-a, then press the functional key (a-z or A-Z), first press ctrl-a, and then z, then
there will be a help window, provides all of the command description.
Note 1:
If close minicom improperly, there will be several
minicom running, you can delete them then the
Note 2:
If you use minicom in a virtual device, you need to add the serial port equipment to the virtual device
before start the Ubuntu in the virtual device, and then start the Ubuntu. And also one point need to note that
when Windows uses in the serial port devices (such as SecureCRT software, and has already used COM3 serial
port), and if the virtual device is also COM3, then after started Ubuntu in the virtual device, the serial port can't
be used in the minicom. Only close the SecureCRT software, release the COM3, then you can use the serial port
in Ubuntu.
Waveshare Electronics
TEL: +86-755-83040832
FAX: 86-755-83042572
minicom will return to work again.
Web: http://www.wvshare.com/
E-mail: sales@wvshare.com
LCK* files in the /var/lock, these files may preven
21
Advertisement
Table of Contents
