Linux Platform Burning; Create Sd Card; Prepare To Burn Image - Waveshare E9 User Manual

Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
Note: After done, users need to reset the default boot mode (The default system is android) in the uboot config
(see the tips in the chapter 4.4), then it can boot the system normally.

9.3 Linux Platform Burning

In the linux platform, it will be burned automatically. Please prepare the following things before burning:
Burning tools
Kernel image
u-boot image
Recovery image
File System
E9 mini PC
Tf card
TF card reader
5V-2A DC Power Supply

9.3.1 Create SD Card

Extract the prepared related tools and images to any directory:
And related directory, and carry out the command:
Note: Here the example based on the writer's computer, SD card disk is the /dev/sdc, and your own computer
will based on the disk after the " #fdisk –l", just avoid burning the program to your computer hard drive, damage
to your data, and cause needless loss.

9.3.2 Prepare to Burn Image

SD card burning automatically is judged from the EmbedSky.ini contents in the images directory in the SD card
root directory, and choose whether to burn or not and which images need to be burned.
must be put in the SD card images directory, if there is no such directory in the SD card, then please create a new
directory (The directory name is images not image)
Note 1: The file format cannot be changed casually, and there is no space behind =, nor can increase or delete a
row. It is strongly recommended to use EmbedSky.ini, and modify on it.
Waveshare Electronics
TEL: +86-755-83040832
FAX: 86-755-83042572
Software\Linux tools\downloader.tar.bz2
boot.img
u-boot.bin
recovery.img
system.img
1pcs
1pcs
1pcs
1pcs
#./create_sdcard.sh -f /dev/sdc
Web: http://www.wvshare.com/
E-mail: sales@wvshare.com
#tar jxvf downloader.tar.bz2 -C
64
The file "EmbedSky.ini"