Table of Contents
Advertisement
Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
Note: After burning is done, users need to reset the default boot mode as "linux used emmc" in the uboot config,
and then it can boot the system normally.
12.3 Linux Platform Burning
In the linux platform, it will use SD card burning automatically. Please prepare the following things before
burning:
Burning tools
Kernel image
u-boot image
File System
E9 mini PC
TF card
TF card reader
5V-2A DC Power Supply
12.3.1 Create SD Card
Extract the prepared related tools and images to any directory:
#tar jxvf downloader.tar.bz2 -C /
to the related directory:
#./create_sdcard.sh –f /dev/sdc
Note: Here the example based on the writer's computer, SD card disk is the /dev/sdc, and your own computer
will based on the disk after the " #fdisk –l", just avoid burning the program to your computer hard drive, damage
to your data, and cause needless loss.
12.3.2 Ready to Burn Image
SD card burning automatically is judged from the EmbedSky.ini contents on the images directory in the SD card
root directory to choose whether to burn and which images need to be burned.
put in the SD card images directory, if there is no such directory in the SD card, then please create a new
directory like that.
Waveshare Electronics
TEL: +86-755-83040832
FAX: 86-755-83042572
Software\Linux tools\downloader.tar.bz2
uImage
u-boot.bin
rootfs.tgz
1pcs
1pcs
1pcs
1pcs
Web: http://www.wvshare.com/
E-mail: sales@wvshare.com
89
The file "EmbedSky.ini" must be
Advertisement
Table of Contents
