Hardware Connection - Waveshare E9 User Manual

Waveshare Electronics
Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China
TEL: +86-755-83040832 Web: http://www.wvshare.com/
FAX: 86-755-83042572 E-mail: sales@wvshare.com
(recovery image), system.img (system image), they cannot name as others, and so after the images are copied to
MFG android directory, the "_E9_for_android_v2.0" should be removed.
If it is generated after compiled, then after the completion of the execution /build_sh, it will be
out/target/product/sabresd_6dq/
After done, the file structure under the directory, Mfgtools-Rel-1.1.0_121218_MX6Q_UPDATER\Profiles\MX6Q
Linux Update\OS Firmware\files\android is as showed below:
Check and confirm if all the above three files are copied successfully, all of them are indispensable.

9.2.2 Hardware Connection

(1) Connect the PC and E9 via USB OTG cable.
(2) Connect the 5V DC power supply to E9 5V jack
(3) USB download mode setting. Set the 2, 3 DIP switch as "1", and 1, 4 DIP switch as "0"to download.
(4) Short / Connect the J5 spare external power supply interface (as marked below)
Note: J5 must be connected during burning. If it is not convenient to connect it, then you can keep pressing the
power button in the whole process, from power on to the end of burning.
After the above three steps are done, E9 connections as shown below:
61