Makita LS1013 Instruction Manual page 26

Lower the handle full and lock it in the
lowered position
by
pushing in the lock
pin. Square the side of the blade with
the face of the guide fence using a trian-
gular rule, try-square, etc. Then securely
tighten the hex bolts on the guide fence
in the order from left side.
Make sure that the pointer indicates 0"
on the miter scale. If the pointer does
not indicate O", loosen the screw secur-
ing the pointer and adjust the pointer.
2) Bevel angle
i ) 0" bevel angle
Push the carriage toward the guide
fence and tighten the knob to secure
the slide poles. Lower the handle fully
and lock it in the lowered position by
pushing in the lock pin. Loosen the
lever at the rear
of
the
tool.
Make sure
that the arm is locked.
I
-Guide fence
I
I
Miter scale
-
Pointer
26