Makita LS1013 Instruction Manual page 18

6.
Cutting crown and cover moldings
*Crown and cove moldings can be cut on
a
compound miter saw with the moldings laid
flat on the turn base.
*There are two common types of crown moldings and one type of
cove moldings;
35/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle
cove molding. See illustrations below.
Ceiling
Ceiling Coiling
52/38" type
crown molding
45" WpQ
crown molding
45"
type
cove molding
*There are crown and cove molding joints which are made to fit "Inside" 90" corners
(@and
@in
Fig.
C)
and "Outside" 90" corners (@and
@
in Fig.
C ) .
Inside corner Outside corner
Fig.
(C
Inside corner
18