Makita LS1013 Instruction Manual page 7

Socket wrench
The
socket wrench
is
stored
as
shown in
the figure. When using the socket wrench,
pull it out of the wrench holder. After using
the socket wrench, return it to the wrench
holder.
Bench mounting saw
This tool should be bolted with four bolts to
a level and stable surface using the bolt
holes provided in the tool's base. This will
help prevent tipping and possible injury.
-
Wrench holder
Installing or removing saw blade
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the blade
Use the socket wrench to loosen the hex
bolt holding the center cover by turning it
counterclockwise. Raise the safety cover
and center cover.
I
Socket wrench
1
Safety cover
7