Table of Contents
Advertisement
2-2 Loading and Cutting Off Media
Position the pinch rollers over the grit rollers.
If the following message appears when you close the front cover, open the front cover, raise the loading lever, and
check the positioning of the pinch rollers and the middle pinch rollers. These must be placed over the grit rollers.
Remove when not using roll media.
If roll media is allowed to stand unused in a loaded state for an extended period, the media may sag. This can cause
poor printing quality and motor errors, so be sure to remove and store such media when not in use.
30
Chapter 2 Operation
Yes
Either RIGHT, or LEFT
is displayed.
6
5
4
PINCHROLL ERROR
XXX FROM RIGHT
This indicates which pinch roller, counting from the right as viewed
from the front, is displaced. (The right pinch roller is included in the
count.)
The number displayed may be from the second ("2ND") to the
sixth ("6TH"), depending on the number used.
No
PINCH ROLL ERROR
INVALID XXXXXX POS
3
2
Middle pinch roller
Pinch roller
Advertisement
Table of Contents
