Table of Contents
Advertisement
Control Panel
Display Screen
This displays various setting
menus and other informa-
tion.
TEST PRINT Key
Holding this down for one
second or longer performs a
printing test.
BASE POINT Key/
Light
You use this when you want
to set the output-start loca-
tion. The light comes on
when the set has been
made.
BUSY Light
This lights up during print-
ing, cutting and other such
operations.
MENU Key
You press this to enter the
menus for various settings.
Cursor Keys
You use these to select set-
tings for menu items, to
move the media, and for
other such operations.
Panel Notation
In this document, the keys and lights on the control panel are indicated by the following images.
MENU Key
HEATER CONFIG Key/Light
CUT CONFIG Key
SHEET CUT Key
ENTER Key
PAUSE Key/Light
TEST PRINT Key
TEST CUT Key
CLEANING Key
BASE POINT Key/Light
CLEANING Key
You use this to perform
cleaning of the print heads.
Cursor Keys
1-2 Part Names and Functions
TEST CUT Key
Holding this down for one
second or longer performs a
cutting test.
ENTER Key
You use this for such tasks
as enabling setting values.
CUT CONFIG Key
You press this when you
make settings for cutting.
HEATER CONFIG Key/
Light
You press this when you
make temperature settings
for the print heater and
dryer. The light flashes while
heating up is in progress,
and remains steadily lighted
when the preset temperature
is reached.
SHEET CUT Key
Holding this down for one
second or longer cuts off
media.
SETUP Light
The light comes on when
media is loaded and the
machine is ready to perform
printing.
PAUSE Key
This pauses output opera-
tion. The light is illuminated
when operation is paused.
Sub Power Switch
This switches the printer on
and off. (To switch the printer
off, you hold down the switch
for one second or longer). The
light flashes when the ma-
chine is in the sleep mode.
Chapter 1 Introduction
21
Advertisement
Table of Contents
