Machine Features - Roland versaCamm sp-540v User Manual

1-1 Machine Features

The machine is the "Print & Cut" machine that combines the two functions of high-quality printing and outline cutting
in a single unit. This makes possible not only use as either a printer or a cutting machine, but also enables versatile
uses such as performing printing followed immediately by cutting, without having to first remove the media from the
machine.
The machine is provided with a crop-mark feature. This makes possible accurate alignment when you want to remove
the media after printing, perform lamination or other processing, then load the media again to perform cutting.
Also, two heaters are built in: a print heater and a dryer. These help to fix and dry the ink, thereby enhancing work
efficiency. The temperature setting for each can be preset to match the ambient environment and the media used.
With these features, the machine can accommodate a wide variety of uses, ranging from the creation of stickers and
cut-out text and small-lot label printing to the production of panels, outdoor signs, and more.
18 Chapter 1 Introduction