Connection Wizard: Step 4: Bandwidth Management; Figure 33 Wizard Step 4: Bandwidth Management; Table 28 Wizard Step 4: Bandwidth Management - ZyXEL Communications p-334whd User Manual

Table 27 Wizard Step 3: WAN IP and DNS Server Addresses for the Backup WAN
LABEL
First DNS Server
Second DNS Server
Third DNS Server
Back
Next
Exit

3.5 Connection Wizard: STEP 4: Bandwidth management

Bandwidth management allows you to control the amount of bandwidth going out through the
ZyXEL Device's WAN, LAN or WLAN port and prioritize the distribution of the bandwidth
according to the traffic type. This helps keep one service from using all of the available
bandwidth and shutting out other users.

Figure 33 Wizard Step 4: Bandwidth Management

The following fields describe the label in this screen.

Table 28 Wizard Step 4: Bandwidth Management

LABEL
Enable BM for all traffic
automatically
Back
Next
Exit
Chapter 3 Connection Wizard
DESCRIPTION
Enter the DNS server's IP address in the fields provided.
If you do not configure a system DNS server, you must use IP addresses
when configuring DDNS and the time server.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
DESCRIPTION
Select the check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device's WAN, LAN or
WLAN port. Bandwidth is allocated according to the traffic type
automatically. Real-time packets, such as VoIP traffic always get higher
priority.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
P-334WHD User's Guide
69