Chapter 9 Dhcp Server; Dhcp; Dhcp Server General Screen; Figure 71 Dhcp Server General - ZyXEL Communications p-334whd User Manual

9.1 DHCP

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL
Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device
provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have
another DHCP server on your LAN, or else the computer must be manually configured.

9.2 DHCP Server General Screen

Click Network > DHCP Server. The following screen displays.

Figure 71 DHCP Server General

The following table describes the labels in this screen.

Table 51 DHCP Server General

LABEL
Enable DHCP Server
IP Pool Starting
Address
Pool Size

Chapter 9 DHCP Server

DESCRIPTION
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132)
allows individual clients (computers) to obtain TCP/IP configuration at startup
from a server. Leave the Enable DHCP Server check box selected unless
your ISP instructs you to do otherwise. Clear it to disable the ZyXEL Device
acting as a DHCP server. When configured as a server, the ZyXEL Device
provides TCP/IP configuration for the clients. If not, DHCP service is disabled
and you must have another DHCP server on your LAN, or else the computers
must be manually configured. When set as a server, fill in the following four
fields.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
P-334WHD User's Guide
C
H A P T E R
DHCP Server
9
127