Function Setting: Vane Angle Control; Function Setting: Mode Change Temp - LG PQRCUSA0 Owners & Installation Manual

Owner's instruction
Function setting : Vane Angle Control
This function is to adjust angle at which airflow is blow out.
38 Wide Wired Remote Controller
1 Press button.
2 Repeat pressing button until
icon flash.
Ex) Setting second Vane Angle as 'P3'
3 Press button to select active
vane: 1/2/3/4/All
1-4: control individually each vane
All: control all vane with the same
duration.
4 Press button to select
Vane number/ Vane angle.
Vane angle : 6 Step(P1~P6) & Sd
Sd : Standard angle
5 Press button to adjust the angle
value.
Function Setting : Mode Change Temp
This function is to set converting temp. of Auto Changeover
Owner's instruction
6 Press button to complete and active
the setting process. (Airflow direction
function will be released whenever
setting vane angle)
7 Press button to exit or
system will automatically release
without any input after 25
seconds.
1
Press button.
2
Repeat pressing button until
icon flash.
Ex) Setting ACO Temp as '3'.
3 Press button to change
converting temp value : 1~7
4 Press button to complete
and active the setting process.
5
Press button to exit or
system will automatically
release without any input after
25 seconds.
Owner's & Installation Manual 39