Midi Control - Source Audio soundblox 2 User Manual

5. Set the desired high position you would like to use.
6. Press the CONTROL INPUT button to complete the assignment.
The LED will blink 3 times to indicate the process is complete.
Note: Different control assignments can be programmed to a preset.
Don't forget to save your settings!

MIDI CONTROL

The Orbital Modulator can be controlled via generic MIDI messages. To
access MIDI functionality, the unit requires a Source Audio Soundblox 2
MIDI Adapter. Please check www.sourceaudio.net for availability. The
adapter connects to the Multi-Function input and provides standard MIDI
IN and OUT 5-pin DIN connectors.
Using Soundblox 2 pedals with MIDI greatly extends the functionality of
the units. Having MIDI I/O allows for remote automation, external control-
lers, firmware updates and more. If you have more than one Soundblox 2
pedal, only one MIDI Adapter is necessary. The Multi-Function output
will act as a MIDI thru to pass the MIDI messages on the other pedals via
a Source Audio SA160 Daisy Chain cable.
For information on using your Soundblox 2 with MIDI and for MIDI
mappings, please visit our website at www.sourceaudio.net.
-
Continued
External Control | 23