Adjusting The Picture - Sanyo LCD-26XR9DA Instruction Manual

Adjusting the picture

PICTURE SOUND TIME OPTION
Picture Mode User
Contrast
Brightness
Colour
Sharpness
Tint
SELECT MOVE
Press 6
scroll the menu
PICTURE SOUND TIME OPTION
Colour Temperature Normal
Aspect Ratio 16:9
Noise Reduction Middle
Overscan
Adaptive Contrast
On
HDMI Black Level
Normal
SELECT MOVE
In D-SUB mode, press
6 or 5
PICTURE SOUND TIME OPTION
Screen
SELECT MOVE
Freezing the picture
Press the FREEZE button to freeze the image
on the screen (the video sources still run). Press
again to restore.
Note:
If a fixed image is displayed on the screen for a
!
long time, that fixed image may become
imprinted on the screen and remain visible.
Therefore do not freeze the picture for a long
time.
In some mode, the FREEZE function can not
!
work.
Adjusting the Picture
To adjust the picture:
1
Press MENU. The on-screen menu opens with the PICTURE
menu displayed, then press 6
2
Press 6
2
LOCK CHANNEL
If a sub-menu exits, press 4
Picture Mode — Selects the picture mode. You can select:
75 !
45
50
50
. Standard (a standard picture)
50
. Mild (a soft picture)
RETURN
. User (user customized picture).
MENU
or 5
to Note: You can also press P .MODE to select the picture mode.
Contrast — Adjusts the contrast.
!
Brightness — Adjusts the brightness.
!
2
Colour — Adjusts the colour saturation.
!
LOCK CHANNEL
Sharpness — Adjusts the sharpness.
!
Tint — Adjusts the image tint. (Only for NTSC system)
!
Colour Temperature — Selects the colour temperature. You
!
On
can select Warm (to enhance the reds), Cool (to enhance the
blues), or Normal.
Aspect Ratio — Selects the aspect ratio of the picture. You
!
can select:
RETURN
MENU
. 16:9 — Shows a full-screen picture in 16:9 mode.
. 4:3 — Shows picture in 4:3 display mode. (Recommended not
to scroll the menu
let TV remain in this mode for extended period of time as to
protect the screen.)
2
. Auto — Selects the correct aspect ratio automatically.
LOCK CHANNEL
. Zoom1 — Enlarges the picture vertically. The top and bottom
may be cropped.
. Zoom2 — Enlarges picture both horizontally and vertically.
The edges may be cropped.
.
source without scaling it (This option is available on either of
RETURN
MENU these two conditions:
resolution:1920 x 1080p;
resolution:1360 x768).
Note: You can also press ZOOM to select the aspect ratio.
! Noise Reduction — Selects the noise reduction mode to
reduce picture noise (snow). You can select Low, Middle,
High, or Off.
! Overscan (D-SUB,HDMI only) — Turn this On to adjust the
picture's reproduction rate (available when the TV's aspect
ratio is in 4:3 or16:9 and the input signal is in video format).
! Adaptive Contrast — Turn this On to optimize the picture
display for a more vivid image.
! HDMI Black Level (HDMI only) — Selects the black level on
the screen. Select Low for darker screen, Normal for brighter
screen. (Available when RGB signal is input through HDMI jack).
! Screen (D-SUB only) — Adjusts the computer image.
to access.
5 to highlight an option, press 3
or OK to access. You can select:
. Dynamic (a bright and vivid picture,
When the TV is powered on in this picture mode, a reminder appears)
1:1 pixel mapping
(D-SUB, HDMI only)
native resolution:1920x1080, input
1
2
4 to adjust the option;
recommended for store use.
— Displays an input
native resolution:1366x768, input
21