Programme Edit - Sanyo LCD-26XR9DA Instruction Manual

Memorizing the Channels & Programme Edit
ATV manual tuning
PICTURE SOUND
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning

Programme Edit

SELECT
Storage To
System
Current CH
Search
Fine-Tune
Frequency
EXIT
18
Adding or changing a channel label
- analogue only -
PICTURE SOUND
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
SELECT
DEL
- analogue only -
TIME OPTION LOCK CHANNEL
MOVE RETURN
MENU
ATV Manual Tuning
11
BG
C-02
445.25 MHz
SAVE SELECT
TIME OPTION LOCK CHANNEL
MOVE RETURN
MENU
Programme Edit
TV 1 S-03
2 C-42
TV
3 S-04
TV
4 C-04
TV
NAME MOVE SKIP
Fav.List
Use the Manual Tuning operation if desired channels can not be preset
by Auto Tuning or if you would like to preset channels to specific
position numbers one by one.
1
In CHANNEL menu, press 6
Tuning, then press4 or OK to access the setting menu.
2
From ATV Manual Tuning setting menu, press 6
an item, press 3
or4 to set the item as shown below.
A. Storage To: Position selection. Press 3
the position you want to store.
B. System: Sound system selection. If certain channel's sound is
abnormal, it may be that the sound system setting is wrong. In
this case, select another sound system.
C. Current CH: Selects current channel using 3
D. Search: Channel search operation.
Press 4
to search up the band or3
Press 3
or4 repeatedly until your desired channel is displayed.
E. Fine-Tune: Manual fine tuning.
Press 3
or4 until better picture and sound are obtained.
F. Frequency: Shows current frequency, it can not be adjusted.
(During the process, you can press EXIT to exit the operation.)
3
Press RED button to save your settings.
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
Press MENU. Press 3
1
6
to access.
Press 6 to select Programme Edit, press 4
or5
2
open the Programme Edit menu and a programme list is
displayed.
3
Within the programme list, press 6
want to label, press GREEN button to start to label. A cursor
appears at the edit field.
4
Use 6 or5 to select a character, use 3
When finished, press OK to confirm.
The maximum length of label is 5 characters.
5
Repeat the above steps to label more channels.
Note: The labels of DTV channels are automatically assigned and
cannot be changed by user.
or5 to select ATV Manual
or5
or4 button to select
or4
to search down the band.
or4 to select CHANNEL menu, press
or5 to select a channel you
or4 to move the cursor.
to select
.
or OK to