Sanyo LCD-26XR9DA Instruction Manual page 11

Connecting an HDMI device
HDMI device
HDMI cable
Connecting a component video device
Component video device
Audio cable
Component cables often have red, green, and blue color-coded video connectors and red and white audio connectors.
Match the colors when making connections.
Connecting a computer
D-Sub cable
Audio cable
Connections
How to connect an HDMI device:
Connect the HDMI cable between the HDMI jack on the TV
(HDMI1/2 located at TV rear, while HDMI3 at TV side) and
HDMI output jack on the device.
Note: If your device has an HDMI connection, we
TV REAR
recommend you use that to get the best quality possible.
To play from the HDMI device:
1. Turn on your TV, then press SOURCE button. The Input
2. Press 5
3. Turn on the HDMI device and set it to the correct mode.
Note:
If the external device has DVI output only, use a DVI to HDMI
adapter cable to connect to the HDMI terminal. Connect the audio
cable to the PC IN AUDIO jack on the TV rear.
To connect a component video device:
Connect the Component Video cable between the Y, Cb/Pb,
Cr/Pr input jacks on the TV and Y, Cb/Pb, Cr/Pr output jacks on
the device .
Connect the Audio cable between the AUDIO input jacks on
the TV and AUDIO output jacks on the device.
TV REAR
To play from the component video device:
1. Turn on your TV, then press SOURCE button. The Input
2. Press 5
3. Turn on your external device and set it to the correct mode.
Component
video cable
To connect a computer:
Connect a VGA cable between the VGA jack on the computer
and the VGA input jack on the unit.
Connect an Audio cable between the AUDIO output on the
TV REAR
computer and AUDIO input jack on the unit.
To monitor port
(15-pin D-Sub)
To audio output jack
(Continued)
Source menu opens.
or6 to select HDMI1 or HDMI2 or HDMI3
correspondingly, then press OK to confirm.
Refer to the instructions that came with the HDMI device.
Source menu opens.
or6 to select Component1 or Component 2,
then press OK to confirm.
See the device's user guide for more information.
To play video from the computer:
1. Turn on your TV,
button. The Input Source menu opens.
2. Press 5 or 6
OK to confirm.
3. Turn on your computer, and adjust the display
properties as required.
then press SOURCE
to select D-SUB, then press
11