Adjusting The Picture - Sanyo LED-32XR11F Instruction Manual

Led-lcd tv
Hide thumbs Also See for LED-32XR11F:
Table of Contents

Advertisement

Adjusting the picture

PICTURE
SOUND
TIME
OPTION
Picture Mode
User
Contrast
Brightness
Colour
Sharpness
Tint
Select
Move
Picture Mode — Selects the picture mode. You can select:
!
. Dynamic (a bright and vivid picture,
appears)
. Standard (a standard picture)
. Soft (a soft picture)
. User (user customized picture).
Note: You can also press P .MODE to select the picture mode.
Contrast — Adjusts the contrast.
!
Brightness — Adjusts the brightness.
!
Colour — Adjusts the colour saturation.
!
Sharpness — Adjusts the sharpness.
!
Tint — Adjusts the image tint. (Only for NTSC system)
!
Backlight — Sets the overall brilliance of the screen.
!
Colour Temperature — Selects the colour temperature. You can select Warm (to enhance the reds), Cool (to
!
enhance the blues), or Normal.
Aspect Ratio — Selects the aspect ratio of the picture. You can select:
!
. 16:9 — Shows a full-screen picture in 16:9 mode.
. 4:3 — Shows picture in 4:3 display mode. (Recommended not let TV remain in this mode for extended period of
time as to protect the screen.)
. Auto — Selects the correct aspect ratio automatically. (Note: In Component mode, due to technology limited, for
480i/p,576i/p "16:9" signal, please select "16:9" aspect ratio manually
. Zoom1 — Enlarges the picture vertically. The top and bottom may be cropped.
. Zoom2 — Enlarges picture both horizontally and vertically. The edges may be cropped.
.
1:1 pixel mapping
(D-SUB, HDMI, Component only)
available when native resolution is 1920x1080 and input resolution is 1920 x 1080p)
Note: You can also press ZOOM to select the aspect ratio.
Noise Reduction — Selects the noise reduction mode to reduce picture noise (snow). You can select Low, Middle,
!
High, or Off.
Overscan (D-SUB,HDMI, USB-Movie only) — Turn this On to adjust the picture's reproduction rate (available
!
when the TV's aspect ratio is in 4:3 or16:9 and the input signal is in video format).
Adaptive Contrast — Turn this On to optimize the picture display for a more vivid image.
!
HDMI Black Level (HDMI only) — Selects the black level on the screen. Select Low for darker screen, Normal
!
for brighter screen. (Available when RGB signal is input through HDMI jack).
Screen (D-SUB only) — Adjusts the computer image.
!
Freezing the picture
Press the FREEZE button to freeze the image on the screen (the video sources still run). Press again to restore.
Note:
If a fixed image is displayed on the screen for a long time that fixed image may become imprinted on the screen and
!
remain visible. Therefore do not freeze the picture for a long time.
In some mode, the FREEZE function can not work.
!
Adjusting the Picture
To adjust the picture:
1
Press MENU. The on-screen menu opens with the PICTURE
LOCK
CHANNEL
menu displayed, then press 6
75
45
Press 6
2
50
If a sub-menu exits, press 4
50
50
Return
MENU
recommended for store use. When the TV is powered on in this picture mode, a reminder
— Displays an input source without scaling it (This option is
,
to access.
5
to highlight an option, press 3
or OK to access. You can select:
)
4
to adjust the option;
21

Advertisement

Table of Contents
loading

Table of Contents