Memorizing The Channels - Sanyo LCD-26XR9DA Instruction Manual

Note: If the Lock System is On, Auto Tuning/DTV manual tuning/ATV manual tuning can not be operated
without password. For details, please see <Setting Child and Rating Locks> section.
Auto Tuning
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
SELECT MOVE
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
Country selection
ATV Manual Tuning
Start Cancel
Programme Edit
SELECT MOVE
DTV manual tuning
- digital only -
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
SELECT MOVE
DTV Manual Tuning
UHF CH
Please select channel then
Press OK to search
DTV
Radio
Bad Normal
EXIT MENU

Memorizing the Channels

Auto Tuning will completely re-tune the TV and can be used to
update the channel list.
It is recommended that Auto Tuning is run periodically to ensure
that all new services are added. All current channels and settings, e.g.
LOCK CHANNEL
locked channels, will be lost.
Note:
As new services are broadcast, it will be necessary to retune the TV in
order to view them.
1
Go to Input Source menu and select ATV or DTV first.
RETURN
MENU
Press MENU. Press 3
2
6
3
Highlight Auto Tuning item, and press 4
LOCK CHANNEL
Now a pop-up screen opens with Australia as default country
4
Australia
and Start is highlighted. Now simply press OK to begin the auto
tuning.(If you want to cancel, press4
press OK.)
All ATV/DTV channels available in your area will be searched and
stored into memory. Please wait until the searching is complete.
RETURN
MENU
5
During the process, if you want to skip, press MENU. To exit
searching, press EXIT.
This feature is available for service engineers or can be used for direct
channel entry if the multiplex channel is known.
1
In CHANNEL menu, press 6
LOCK CHANNEL
Tuning, then press4
2
Highlight UHF CH item, press 3
desired multiplex number.
3
Press OK to begin the search for that multiplex.
At the bottom of the menu screen the DTV Signal strength bar
RETURN
MENU
is displayed. You can make use of it to check how strong your
DTV signal is and whether you need to adjust your antenna. The
higher the signal strength is, the less likely you are to experience
23
picture degradation.
4
When the multiplex is found, any channels that are not currently
4
2 in the channel list will be added and the channel information will
be updated.
Good
During the process, you can press MENU or EXIT to exit the
search.
SELECT
or4 to select CHANNEL menu, press
to access.
or OK to access.
or OK to access.
to select Cancel and
or5 to select DTV Manual
or4 button to select your
17