en
Note: You can use the fi lter indicator to
mark the month in which you inserted the
fi lter. You can also mark the month in which
you will need to replace the fi lter next (at
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
fi lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
TES55236RU.indb 29
Menu settings
You can adapt the appliance to your
individual needs in the menu settings.
e
j
1. Hold the
off /
button (12) down for
at least 3 seconds.
e
j
2. Press the
off /
repeatedly until the required menu item
appears in the display.
3. Select the required setting with the
upper rotary knob (14).
4. Confi rm by pressing the start button
(10).
To leave the menu without making any
changes, turn the rotary selector to
and press the start button (10).
You can set the following:
Shut off
Here you can set the time span after which
the appliance automatically switches off
following the last drink preparation. A time
between 15 minutes and 4 hours can be
set. The default time is 1 hour, but this can
be shortened to save energy.
Filter
Here you can set whether a water fi lter is
being used. If a water fi lter is not being
used, turn the setting to
water fi lter is being used, turn the setting to
Activate fi lter
. New water fi lters have to
be rinsed before use (see "Water fi lter" on
page 28).
Start Calc'n'Clean
The service programmes (
descaling
cleaning
/
manually here. Press the start button (10)
and run the selected programme (see
"Service Programmes" on page 36).
Temp.
The brewing temperature (
low
) can be set here.
29
button (12)
Exit
No / Old
. If a
Calc'n'Clean
/
) can be selected
high
middle
/
/
TES552... | 05/2013
04.06.2013 14:35:45