Safety Precautions - Launch X-431 PRO User Manual

LAUNCH

Safety Precautions

Before using X-431 PRO, please read the following safety information carefully.
Never collide, throw, or punch X-431 PRO, and avoid falling, extruding and
blending it.
Do not use X-431 PRO in exceptionally cold or hot, dusty, damp or dry
environments.
In places where X-431 PRO is forbidden or using X-431 PRO may cause
interference or generate a potential risk, please turn off it.
To ensure a safe driving, please do not use X-431 PRO while driving.
Turn off X-431 PRO before boarding any airplane.
Do not dismantle X-431 PRO by yourself. If there is any inquiry, please
contact the dealer.
Never place X-431 PRO into apparatus with strong electromagnetic field.
Keep X-431 PRO far away from magnetic devices because its radiations
may erase the data stored on the devices.
Store X-431 PRO out of reach of children and do not allow children to use it
unsupervised.
Please use the included battery and charger. Otherwise, explosion may
happen.
Do not disconnect power abruptly when X-431 PRO is being formatted or in
process of uploading or downloading. Or else it may result in program error.
Precautions on Using X-431 PRO
The ignition switch should be OFF while plugging or unplugging the
DBScar diagnostic connector.
When DBScar connector is not used, remember to place it into the
diagnostic connector housing located at the back of the protection sleeve
to avoid loss.
If your vehicle keeps unattended for a week or a long period, it is
suggested to unplug the connector from vehicle's DLC to save battery
power.
While diagnosing a vehicle, you are not advised to use phone or
X-431 PRO User's Manual — Safety Precautions
ii