Heatrae Sadia ADVANCE Installer Manual page 6

Secure the appliance or system against
-
being switched on accidentally.
The appliance includes moving parts.
-
When the plug is removed from the
wall socket, these parts will continue
moving for a few seconds. Therefore,
you should wait a minimum of 10
seconds before opening the appliance
after removing the plug.
ä
Important!
The safety instructions must be followed in
●
order to prevent physical injury and/or
damage to the product.
Maintenance instructions must be
●
followed to prevent damage and
excessive wear and tear.
The product may not be modified.
●
The product is only suitable for use with a
●
230 V, 50 Hz AC power supply system.
Ensure that the electrical system to which
●
the product is connected meets the
necessary conditions.
Do not expose the product to the
●
elements.
Do not place any objects on top of the
●
device.
Inspect the product regularly for faults. In
●
the event of faults, immediately contact
your installer or Heatrae Sadia.
Switch the product off if:
●
The product is not working properly.
-
You want to clean the outside of the
-
product.
Ensure that the electrical circuit does not
●
become damaged.
Do not use the device to extract air from
●
boilers, heating systems etc.
6
Ensure that the device drains into a sewer
●
system which leads outside, and is
suitable and installed for this purpose.
Ensure that air valves and grilles are not
●
obstructed, and that they are clean.
Watch out for sharp and protruding duct
●
sections during periodic cleaning of air
valves and grilles.