Safety And Other Regulations - Heatrae Sadia ADVANCE Installer Manual

Table of Contents

Advertisement

1. Safety and other regulations

ä
Warning!
The specifications and settings of the
ventilation system comply exclusively with
the standards and statutes of the country
in which the ventilation system is sold.
Applications outside this country can lead
to very dangerous situations.
The entire system must comply with the
current regulations as referred to in this
document and other applicable
documents provided by the manufacturer.
All supplements, amendments and
regulations effective at the time of
installation are applicable for all
regulations.
After installation, no health, safety or
environmental risks may be present in
accordance with the applicable CE
standards. This also applies to other
products included in the system.
Do not use the product for purposes other
than those for which it is intended, as
described in this manual.
Be careful when using electrical
appliances:
Never touch the appliance with wet
-
hands.
Never touch the appliance when
-
barefoot.
This product and/or system may be
operated safely by children aged 12 years
and older and by people with physical,
sensory or mental disabilities or a lack of
experience/knowledge if under
supervision or after having received
instructions regarding safe use, and if they
are aware of the product and/or system
hazards.
Cleaning and maintenance by the user
may not be done by children or people
with physical, sensory or mental
disabilities or a lack of experience/
knowledge without supervision.
Do not allow children to play with the
product and/or system.
Do not use the product in the vicinity of
flammable or volatile substances such as
alcohol, insecticides, petrol etc.
Work may solely be performed on the
system by Heatrae Sadia or recognised
installers in accordance with the provisions
laid down in this manual. Only original
accessories and parts produced by the
manufacturer may be used for these
purposes.
The system includes parts which may be
live. The installer should take the following
steps before carrying out work on an open
system:
Disconnect power to the appliance or
-
system by unplugging the power cord
at the wall socket.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advance plus

Table of Contents