Wall Mounting - Heatrae Sadia ADVANCE Installer Manual

3.2.4. Wall mounting

a) Attach the mounting bracket to the wall using anchor plugs and
6 mm screws (not provided).
(575)
>125 (1) 425 (2)
(1) Minimum clearance around the ventilation unit
(2) Distance between hole centres
ä
Caution!
Ensure that the mounting bracket is mounted horizontally and
level for proper condensate drainage.
b) Slip the duct adapters back over the mounting bracket and
push the two adapters to the left and to the right as far as they
will go.
18
c) Hook the two wire brackets onto the outside of the duct
>125 (1)
ä
There is only one way to insert the ventilation unit adapters into
the duct adapters.
d) Place the ventilation unit in the wire brackets, tilted forward
adapters using the holes intended for this purpose.
Caution!
slightly. There are recesses on the underside of the EPP
housing into which the wire brackets fit exactly. When the
adapters have been fully inserted into one another, you will
hear a distinct click. This means the unit is firmly attached.
2x
2x