Unpacking And Assembly - GGP ITALY SPA 102 Owner's Manual

3. UNPACKING AND ASSEMBLY

For storage and transport purposes, some components of the
machine are not installed in the factory and have to be assem-
bled after unpacking. Follow the instructions below.
IMPORTANT
The machine is supplied without engine
oil or fuel. Before starting the engine, fill with oil and fuel fol-
lowing the instructions given in the engine manual.
WARNING!
Unpacking and completing the as-
sembly should be done on a flat and stable surface, with
enough space for machine handling and its packaging,
always making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual
parts and fittings, and do not damage the cutting deck when tak-
ing the machine off the pallet.
The packing contents:
– the machine;
– the steering wheel;
– the seat;
– the front bumper (if provided);
– the battery
– the grass-catcher components;
– an envelope containing:
– the operator's manuals and documents,
– the nuts and bolts,
– 2 starter keys and a spare 10 A fuse.
NOTE
To prevent damage to the cutting deck,
raise it to its maximum height and take utmost care when tak-
ing the machine off the pallet.
To make it easier to move or take the machine off the pallet,
put the transmission disengagement lever in position «B»
( 4.33).
Disposal of the packaging should be done in accordance with
the local regulations in force.
3.2 FITTING THE
STEERING WHEEL
Put the machine on a flat
surface and straighten up
the front wheels.
Use a screwdriver to re-
move the central cover
(1a) of the steering wheel.
Fit the steering wheel (1)
onto the protruding shaft
1
1a
EN 9