Adjusting The Carconnect Output Gain; Hfp Controls; A2Dp Controls - iSimple CarConnect Owner's Manual

CarConnect
Smartphone Integration Interface
Installation/Owner's Manual
Operation Navigation Radios (Cont.)

Adjusting the CarConnect Output Gain

Enter the mode select menu and turn the Tune Knob until "Settings" is displayed on the radio. Press the ►I
Seek button again to enter Settings. "BT Config" will be displayed on the radio. Press the ►I Seek button
again to enter the configuration menu. Turn the Tune Knob until "Spkr Vol" is displayed on the radio. Press
the ►I Seek button again to enter adjustment mode. Turn the Tune Knob to adjust the output gain.

HFP Controls

Answer Call
Press the ►I Seek button on the radio or the Voice button on the SWC to answer the incoming call.
End Call
Press the I◄ Seek button on the radio or the ▼ on the SWC to end a call.
Reject Call
Press the I◄ Seek button on the radio or the ▼ on the SWC to reject a call.
Privacy
Press the ►I Seek button on the radio to switch the call over to the handset. Press again to return to the
Bluetooth kit.

A2DP Controls

Play/Pause
Press the ►I Seek button on the radio or the ►I button on the SWC to pause the current track. Press again
to play the current track.
Track Up/Down
Turn the Tune Knob on the radio or press the ▲ or ▼ buttons on the SWC to change tracks.
Voice Recognition
Press the I◄ Seek button on the radio or the Voice button on the SWC to initiate your phone's VR function.
This will launch whatever the default VR function is on your phone (Siri, S-Voice, Google Voice, etc)
iSimple a Division of AAMP of America | Clearwater, Florida 33760 | Ph. 866-788-4237
®
Rev. 100214
support@isimplesolutions.com | www.iSimpleSolutions.com
©2014 AAMP of Florida, Inc.
Page 4