Calibration Adjustment - Pioneer DJM-2000 Service Manual

5

8.4 CALIBRATION ADJUSTMENT

Perform the calibration adjustment after the Touch Panel (DSX1081) is replaced.
Enter the Test mode, then perform the following adjustment on page 14. (Refer to "6.1 TEST MODE.")
Page 14
[Touch panel confirmation screen 1]
[TCH FX ON/OFF]
Calibration Start
Detection of
touching
[Touch panel confirmation screen 2]
Detection of
touching
Touching of
the 5 points
is finished.
SAVE
5
6
[Calibration screen]
Hold it touched until
the next touch point
is displayed (for
about 1 sec).
Press the
TCH FX
ON/OFF
button.
Touch the displayed
touch point.
Detection of
touching
Touch here.
Press the SAVE
or CANCEL
button.
CANCEL
SAVE: For storing data
CANCEL: For abandoning data
6
7
Detection of
touching
Detection of
touching
Touch here.
[The display returns to [Touch panel confirmation screen 1].]
[TCH FX ON/OFF]
Calibration Start
DJM-2000
7
8
A
Touch here.
B
C
Touch here.
D
Touching of the 5
points is finished.
E
F
49
8